Small House Solutions l Design-Build in Texas
  • Home
  • ADUs
    • ADU Feasibility
    • ADU Cost
    • ADU Utilities
    • ADU Projects
    • Austin ADU Regulations
    • Permit Process
    • Our ADU Process
  • LOCATIONS
    • Bastrop County
    • Bell County
      • Copperas Cove
      • Harker Heights
      • Killeen
    • Bexar County
      • Cibolo
      • Converse
      • Leon Valley
      • Live Oak
      • San Antonio
      • Schertz
      • Universal City
    • Blanco County
    • Burnet County
      • Marble Falls
    • Caldwell County
      • Lockhart
    • Comal County
      • New Braunfels
    • Texas
    • Gillespie County
      • Fredericksburg
    • Guadalupe County
      • Seguin
    • Harris County
      • Houston
    • Hays County
      • Kyle
      • San Marcos
    • Kendall County
      • Boerne
    • McLennan County
      • Waco
    • Travis County
      • Austin
      • Lakeway
      • Pflugerville
    • Williamson County
      • Hutto
      • Cedar Park
      • Georgetown
      • Leander
      • Round Rock
      • Taylor
  • Projects
  • About
  • Resources
    • ADU Resources
    • Utilities Guide
    • Frequently Asked Questions
    • Permit Process
    • What Is an ADU?
  • Contact Us
      • Phone Consultation
      • Zoom Consultation
  • Menu Menu

Small House Solutions | ADUs

ADU Feasibility Reports: Deliverables to Review Before Design

An ADU feasibility report should explain the findings, open questions, and next decisions for one property. Review the evidence behind a go, revise, or stop recommendation before paying for the next design stage.

Discuss your property

Surveyor at construction site

Establish the site information needed before fixing the building position.

Start here

Start with the address, survey, property records, and intended use.

Investigate

Identify trees, easements, drainage, setbacks, and service routes on a site plan.

Compare early

Separate preliminary findings from items that require city or utility confirmation.

On this page7 sections to exploreShowHide
  1. 01Require a decision, not a generic checklist→
  2. 02Translate findings into the next investment→
  3. 03A useful feasibility deliverable→
  4. 04Which feasibility finding controls the next decision→
  5. 05Use a constraint to decide whether to move the concept→
  6. 06Related planning decisions→
  7. 07Homeowner questions→

Require a decision, not a generic checklist

The study should identify the parcel and jurisdiction, list documents reviewed, draw a preliminary building envelope, and state unresolved questions. Trees, easements, drainage, utility routes, and construction access need to appear on the same site sketch. Distinguish a preliminary screen from survey, engineering, utility approval, or a permit decision. Each uncertainty should name who will confirm it and the decision it may change.

Describe the intended resident and daily use. An independent home for a family member, a rental dwelling, and a work building are not interchangeable briefs. Include any likely future change that should influence the first review. A useful feasibility scope connects those needs to a particular property and proposed pathway, rather than delivering a generic list of ADU considerations that never states what they mean for your site.

Architect holding rolled plans beside a glass-block wall

Discuss the household brief and unresolved scope before committing to construction.

Translate findings into the next investment

A constrained rear yard may favor an attached unit or smaller one-story plan; a difficult utility route may change placement before room design begins. Ask for options with reasons, not only one favored footprint. In Austin, the ADU and HOME pathways must be distinguished; in San Antonio, use the city’s ADU requirements rather than transferring Austin assumptions.

A report can support a revised project as well as the first idea. For example, compare a preferred rear-yard position with a smaller footprint that preserves a service route. The findings should explain which constraint changes and what benefit is lost, such as a separate work room. A recommendation to revise is useful when it identifies a workable tradeoff; a different sketch with the same unresolved controlling constraint has not advanced the decision.

Two surveyors talking, one looking down

Review the room layout and exterior elevations together.

A useful feasibility deliverable

Output What it shows Next decision
Rules summary Applicable pathway and parcel questions Which authority must confirm
Site envelope Constraints and access on a survey Where and how large
Budget risks Utility, structure, and site unknowns Whether to commission design

Which feasibility finding controls the next decision

Feasibility questions do not all have the same consequence. An uncertain building location can change the whole floor plan; an unresolved finish selection usually cannot establish whether the dwelling fits on the parcel. The investigation is most useful when it distinguishes a controlling constraint from a later design choice.

Some findings interact. Moving the building to avoid one constraint may lengthen a service route or reduce privacy between homes. A sketch showing only a permitted-looking outline misses that interaction. The study needs enough site context to explain why its preferred position is more workable than another position, including which assumptions remain unconfirmed.

A useful conclusion links evidence to an action. A promising concept can proceed with named questions still open. Another concept may need a targeted service investigation before detailed drawings are worthwhile. A negative conclusion should identify the obstacle and whether it applies to the whole household goal or only to the proposed arrangement. These distinctions make a feasibility study more informative than a checklist of possible problems. They also prevent a preliminary screen from becoming an unsupported promise about final area, price, technical compliance, or approval.

Use a constraint to decide whether to move the concept

Consider a hypothetical site where an attractive rear building position conflicts with the proposed route for services. The feasibility report should compare keeping the location, shifting the footprint, and investigating another service approach. It should not label the site simply feasible while leaving the controlling conflict unexplained.

For each option, note what is known, what must be confirmed, and which intended function changes. Moving the dwelling might improve the service route but reduce outdoor privacy. Keeping the location might preserve the garden while requiring further provider or technical review. Those are different decisions, even when both sketches show the same floor area.

Ask for a preferred next action and the reason for it. The action might be a targeted investigation rather than detailed design. Identify the finding that would cause the concept to change or stop. This makes the report useful to an owner deciding where to spend the next design dollar. A carefully bounded unresolved conclusion is more actionable than a confident green light unsupported by parcel-specific evidence.

Electrical outlet and wiring

Include wiring routes and electrical work in the project scope.

Related planning decisions

Choose the next topic that helps you move your project forward.

  • Property planningCheck ADU property feasibilityExplore the site questions to resolve before committing to ADU design.Explore topic→
  • ServicesADU planning & constructionExplore property, design and construction considerations for an ADU.Explore topic→
  • Project examplesExplore completed projectsReview the documented scope of published Small House Solutions projects.Explore topic→


Homeowner questions

Is feasibility the same as permit approval?

No. Feasibility is an early investigation. Final drawings, engineering, utility decisions, review comments, and inspections can still change the approved scope.

Should I order a survey before the feasibility conversation?

Ask which existing survey or parcel information can support the initial screen and what a current survey must resolve. The required detail depends on the question being investigated. Do not substitute an informal online parcel outline for information needed to establish a design boundary.

Can a feasibility report be reused for a different ADU design?

Some property findings may remain relevant, but a changed use, footprint, unit count, or service strategy can change the analysis. Have the team identify which conclusions still apply and what must be revisited. Preserve the original scope and date in the record.

Plan the next step for your property

Share your property address and what the space needs to do. Ask Small House Solutions about site feasibility, current service fit, and a defined next step.

Discuss your project

Small House Solutions' Stacked Tag Color
© 2026 Small House Solutions, LLC. Texas custom design-build homes, ADUs, additions, and remodels. - Enfold Theme by Kriesi
  • Link to Facebook
  • Link to Instagram
  • Link to Houzz
  • Link to X
Link to: Energy Efficient Custom Homes: Specify Performance Before Finishes Link to: Energy Efficient Custom Homes: Specify Performance Before Finishes Energy Efficient Custom Homes: Specify Performance Before FinishesMan with bundle of roof insulation
Scroll to top Scroll to top Scroll to top
Small House Solutions logo

Free project-fit consultation

Talk through your small home or ADU project.

Get clear next steps on project fit, budget range, site questions, and whether Small House Solutions is the right design-build partner for your property.

ADUs
Custom homes
Additions
Remodels
Schedule a Phone ConsultationBest first step
Schedule a Zoom ConsultationScreen share or remote planning

Choose the option that is easiest for you. Either consultation can help confirm whether your scope and budget are aligned before deeper planning begins.

Before you book

Know the likely investment range.

Small House Solutions is a custom design-build firm, not a low-budget builder. Typical project contracts range from $240 to $500+ per square foot, with cost often decreasing as square footage increases.

  • $150,000 minimum construction contract pricing for most projects.
  • Accessory structures with no plumbing, such as a backyard office, may be an exception.
  • If the budget does not fit the scope, the team may follow up by email instead of holding the consultation.

Ready to compare your idea against the real numbers? Pick a consultation type and bring your address, rough budget, desired size, and timeline.

Small House Solutoin logo

Initiating Contact With Small House Solutions

As you prepare for this project, please bear in mind that “small” does not equal “cheap”. We are not a low-budget builder.

Schedule a Phone Consultation
Schedule a Phone Consultation

 

Our project contracts range from $240 to $500+ per square foot, with cost decreasing as square footage increases. Due to current market conditions, we cannot offer construction contract pricing under $150,000, with the exception being accessory structures with no plumbing (i.e.: backyard office). If your specified budget is not realistic for your project, we will respectfully cancel your consultation with an email response as to why.

We look forward to speaking with you.